Reduction of NOx Formation Using Control of Fuel Atomizing Pressure in a Spray Combustion System.
نویسندگان
چکیده
منابع مشابه
Three-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملAccurate Simulation of Low-Pressure Port Fuel and Water Spray in Internal Combustion Engines; Numerical and Experimental Study
One of the solutions to reduce pollutants and increase engine power is to use water spray in internal combustion engines. In this type of engine, fuel and water sprays play an important role in engine performance. In this regard, the purpose of this study is to accurately simulate fuel and water sprays and provide optimal coefficients to achieve the best simulation results. For this purpose, th...
متن کاملModelling NOx-Formation in Combustion Processes
As the regulations of pollutant emission is getting more and more strict, models of pollutant formation, as a part of system level models for control design, are needed. In this thesis NOx (nitrogen oxides) formation is modeled. A method is developed to mix equilibrium and non-equilibrium reaction equations to model NOx formation in combustion processes. This algorithm reduces high-index DAE sy...
متن کاملRotating injector in DI diesel engine for improving performance and reducing NOx emission
Oxides of Nitrogen are the major emission from a diesel engine. It is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of NO is promoted. Various techniques are therefore employed to reduce the NOX emission like EGR, SCR, etc. In this present work a rotating injector is a tec...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1994
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.60.314