Reduced order model for an electro-hydraulic valve of a gas turbine engine's controller

Feed Forward Linear Quadratic Controller Design for an Industrial Electro Hydraulic Actuator System with Servo Valve

Electro-hydraulic servo actuator (EHA) system consists of several dynamic parts which are widely used in motion control application. These dynamic parts need to be controlled to determine direction of the motion. In this research paper, system identification technique is used for system modeling and the model of the system is estimated by using parameter estimation technique. This process start...

Electro-hydraulic Servo Valve Systems

Hydraulic systems driven by servo valves provide highly accurate control over enormous forces. A servo valve system consists of a transducer, a servo amplifier, a servo valve, and an actuator with a connected load. It is a closed-loop system used for the precise control of the output (load) parameter, such as position, velocity, or force, in response to a command signal. The output is converted...

Prognosis of Faults in Gas Turbine Engines

A problem of interest to aircraft engine maintainers is the automatic detection, classification, and prediction (or prognosis) of potential critical component failures in gas turbine engines. Automatic monitoring offers the promise of substantially reducing the cost of repair and replacement of defective parts, and may even result in saving lives. Current processing for prognostic health monito...

Millimeter-scale, Mems Gas Turbine Engines

The confluence of market demand for greatly improved compact power sources for portable electronics with the rapidly expanding capability of micromachining technology has made feasible the development of gas turbines in the millimeter-size range. With airfoil spans measured in 100’s of microns rather than meters, these “microengines” have about 1 millionth the air flow of large gas turbines and...

Anomaly Detection in Aircraft Gas Turbine Engines