Recrystallization of Reversed Austenite and Subsequent Martensitic Transformation in 18%Ni Maraging Steel
نویسندگان
چکیده
منابع مشابه
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملInvestigation of strain-induced martensitic transformation in metastable austenite using nanoindentation
T.-H. Ahn, C.-S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. George and H.N. Han* Department of Materials Science and Engineering and Center for Iron and Steel Research, RIAM, Seoul National University, San 56-1, Shinrim-dong, Kwanak-gu, Seoul, 151-744, Republic of Korea Ferrous Alloys Research Group, Korean Institute of Materials Science, 66 Sangnam, Chanwon, 641-831, Republic of Korea Materials Scien...
متن کاملTransformation potential predictions for the stress-induced austenite to martensite transformation in steel
The stress-induced transformation behavior of retained austenite is considered in this work. With the development of transformationinduced plasticity (TRIP) steels this deformation mode is of growing importance. Twinned martensite structures were calculated using the crystallographic theory of martensite. An available work criterion was used to predict the transformation potentials for 16 diffe...
متن کاملcompactifications and representations of transformation semigroups
this thesis deals essentially (but not from all aspects) with the extension of the notion of semigroup compactification and the construction of a general theory of semitopological nonaffine (affine) transformation semigroup compactifications. it determines those compactification which are universal with respect to some algebric or topological properties. as an application of the theory, it is i...
15 صفحه اولMODIFYING THE MICROSTRUCTURE AND PROPERTY OF 30CrMnSi STEEL BY SUBCRITICAL AUSTENITE REVERSE TRANSFORMATION QUENCHING
Article history: Received: 23.12.2013. Received in revised form: 15.01.2014. Accepted: 15.01.2014. Subcritical austenite reverse transformation quenching was used to improve the mechanical properties of 30CrMnSi steel, and the microstructure and mechanical properties of the samples were analyzed by subcritical austenite reverse transformation quenching. Experimental results show that subcritica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1980
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.20.700