Recovery of valuable metals from argon oxygen decarburization (AOD) dusts by leaching, filtration and solvent extraction
نویسندگان
چکیده
منابع مشابه
Studies on Platinum Recovery from Solutions after Leaching of Spent Catalysts by Solvent Extraction
The results of studies on the separation of platinum(IV) ions by solvent extraction from aqueous solutions after leaching of spent catalysts have been reviewed. The following processes have been discussed: acid leaching of spent catalysts and solvent extraction of platinum(IV) ions by using organophosphorous acids, amines and oximes as the extractants. In hydrometallurgical leaching of spent au...
متن کاملsynthesis of sulfides from alcohols and thiols in solvent-freeconditions and deoxygenation of sulfoxides
کاتالیست یک سنتز جدید برای تیواترها توصیف شده است. واکنش الکل ها با آریل، هتروآریل و آلکیل تیو ل ها درحضور 1،3،5- تری آزو- 2،4،6- تری فسفرین-2،2،4،4،6،6 هگزاکلراید ((tapc به عنوان یک کاتالیست موُثر، بازده های خوب تا عالی از تیواترها را حاصل می کند. علاوه براین، واکنش تحت شرایط بدون فلز و بدون حلال پیش می رود، بنابراین یک مکمل جالب برای روش های شناخته شده سنتز تیواترها ارائه می دهد. یک مکانیسم ا...
15 صفحه اولRecovery of Vanadium from H2SO4-HF Acidic Leaching Solution of Black Shale by Solvent Extraction and Precipitation
Abstract: The recovery of vanadium from sulfuric and hydrofluoric mixed acid solutions generated by the direct leaching of black shale was investigated using solvent extraction and precipitation methods. The process consisted of reduction, solvent extraction, and stripping, followed by precipitation and calcination to yield vanadium pentoxide. The influence of various operating parameters on th...
متن کاملRecovery of cobalt sulfate from spent lithium ion batteries by reductive leaching and solvent extraction with Cyanex-272
Cobalt sulfate was recovered from crushed and screened prismatic type spent lithium ion batteries (LIBs) containing 5~20 % Co, 5~7 % Li, 5~10 % Ni, 15% organic chemicals, and 7% plastics together with Cu, Al, Fe, and Mn. Cobalt was reductively leached from the -16 mesh fraction in 1 h by stirring with 2 M H2SO4 and 6 vol% H2O2, at 60 C and 300 rpm using a solid/liquid ratio of 100 g/L to give a...
متن کاملLeaching studies for metals recovery from printed circuit boards scrap
In this paper, the leaching behavior of the major metals present in printed circuit boards waste is evaluated, aiming at its recycling by hydrometallurgy. Several leachants were compared (sulfuric, hydrochloric and nitric acids, at 2 M H concentration), at temperatures of 25oC and 90oC and 4 hours of reaction time. Sulfuric acid leaching was not very promising concerning metals dissolution bein...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hydrometallurgy
سال: 2013
ISSN: 0304-386X
DOI: 10.1016/j.hydromet.2013.10.002