Recovery of silver from waste printed circuit boards (WPCBs) through hydrometallurgical route: A review
نویسندگان
چکیده
منابع مشابه
LEACHING OF METALS FROM WASTE PRINTED CIRCUIT BOARDS (WPCBs) USING SULFURIC AND NITRIC ACIDS
This study aims to understand the acid-leaching behavior of metals from 2 to 4 mm waste printed circuit boards (WPCBs) containing 22.0% ± 1.1 Cu, 6.7% ± 0.2 Ca, 0.68% ± 0.02 Sn, 0.59 ± 0.01 % Pb, 2.71% ± 0.08 Al, 0.22% ± 0.01 Fe, etc.. Copper leaching was increased for sulfuric acid concentrations up to 1.2 mol/L and hydrogen peroxide concentrations of 10.0 vol% for a pulp density of 100 g/L at...
متن کاملHydrometallurgical Recovery of Metals from Large Printed Circuit Board Pieces
The recovery of precious metals from waste printed circuit boards (PCBs) is an effective recycling process. This paper presents a promising hydrometallurgical process to recover precious metals from waste PCBs. To simplify the metal leaching process, large pieces of PCBs were used instead of a pulverized sample. The chemical coating present on the PCBs was removed by sodium hydroxide (NaOH) tre...
متن کاملRecovery of Gold, Silver, Copper and Niobium from Printed Circuit Boards Using Leaching Column Technique
Nowadays, over 300 tons of Au are used in electronic equipment each year with other precious and strategic metals such as Ag, Pt, Pd, Cu, Nb, Ta, etc.. After the use-phase, the electronic devices become electronic waste (e-waste); consequently it is important to consider e-waste as a secondary supply for the recovery of these metals. This paper presents the recovery of Au, Ag, Cu and Nb from PC...
متن کاملEnergy Recovery from Waste of Printed Circuit Boards in Plasmatron Plasma Reactor
This paper presents results of research on the use of plasma technology for printed circuit boards (PCB) processing for metals and energy recovery. In the Industrial Research Institute for Automation and Measurements, a test stand was built allowing experiments on plasma process with throughput of 800 kg per day. Brief examination of PCB waste was carried out, focusing on identification of its ...
متن کاملRecovery of high purity precious metals from printed circuit boards.
Waste printed circuit boards (WPCB) have an inherent value because of the precious metal content. For an effective recycling of WPCB, it is essential to recover the precious metals. This paper reports a promising method to recover the precious metals. Aqua regia was used as a leachant and the ratio between metals and leachant was fixed at 1/20 (g/ml). Silver is relatively stable so the amount o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Environmental Challenges
سال: 2021
ISSN: 2667-0100
DOI: 10.1016/j.envc.2021.100073