Recovery of Lead and Zinc from Complex Industrial Waste of Zinc Process with Ammonium Acetate
نویسندگان
چکیده
Zinc filter cakes (ZFCs) have economic values as secondary sources, but also are classified hazardous waste and negative effects on human health the environment because they contain several heavy metals. Especially extraction recovery of lead zinc metals from ZFCs will provide environmental benefits. Therefore, in this study, with a weak acid (ammonium acetate, AmAc) leaching was investigated, then cementation dissolved Pb pregnant leach solution using metal powder studied. The parameters such AmAc concentration, temperature, time, solid/liquid ratio were revealed single factor. Lead examined different time temperature ranges. As result experimental studies, 81% 34% extracted ZFC under selected condition; 3 M 70°C 1 h 1/10 g/mL ratio. Cementation processes 45°C 120 min showed that 70% ions recovered solution. Also, activation energy for calculated 33.4 kj/mole.
منابع مشابه
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue
This paper reports on the recovery of zinc, cobalt and manganese by two-step leaching of zinc-plants purification residue with sulfuric acid. The residue, hot filter press cake (HFC), contains 14 % ZnO, 4.8 % Co3O4 and 22.9 % MnO. Effects of different parameters are determined and used to optimize the process. With acid to hot filter press cake (HFC) stoichiometry of 0.85, acid concentration of...
متن کاملZinc recovery and waste sludge minimization from chromium passivation baths.
This work reports the feasibility of applying emulsion pertraction technology (EPT) aiming at zinc recovery and waste minimization in the zinc electroplating processes that include Cr (III) passivation. The assessment consists of firstly the lifetime extension of the passivation baths by selective removal of the tramp ions zinc and iron, and secondly, the recovery of zinc for further reuse. Spe...
متن کاملZinc Electrodeposition from Acetate Solutions
he electrodeposition of zinc on iron and steel for protection T against corrosion was first proposed in 1840. The combination of aesthetic appeal and protection thus provided has established bright zinc plating as an important process in modern industry. In today's technology, zinc is preferably deposited from acid-type electrolytes, especially chloride, as an alternative to those based on cyan...
متن کاملa study on the design of bio-ethanol process from date wastes of sistan and baluchistan province
اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...
Synthesis of zinc oxide nanoparticle by zinc acetate precursor and study on its catalytic properties
ZnO nanoparticles have been prepared by a simple method in a short period of time. In this synthetic method, the sample was obtained using Zn(CH3COO)2·2H2O and a new template of hexamine salt. Their crystalline structure and morphology were studied by XRD and SEM. The optical properties of the sample were studied by UV–visible spectroscopy. The absorption spectr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2023
ISSN: ['1543-1851', '1047-4838']
DOI: https://doi.org/10.1007/s11837-022-05692-4