Recovery of Copper from Motor Scrap Utilizing Ammonia Leaching Technique. Stuidies on the selective recovery of copper and iron from motor scrap. (2nd Report).
نویسندگان
چکیده
منابع مشابه
Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching
Solvent extraction of copper from the copper leach solution obtained from the ammoniacal carbonate leaching of the Sarcheshmeh copper concentrate was carried out, and the performance of CP-150, LIX984N, and Kelex100 as well as the effects of different parameters involved were investigated. According to the results obtained, the extraction kinetics of all the three extractants was fast. High con...
متن کاملLeaching studies for metals recovery from printed circuit boards scrap
In this paper, the leaching behavior of the major metals present in printed circuit boards waste is evaluated, aiming at its recycling by hydrometallurgy. Several leachants were compared (sulfuric, hydrochloric and nitric acids, at 2 M H concentration), at temperatures of 25oC and 90oC and 4 hours of reaction time. Sulfuric acid leaching was not very promising concerning metals dissolution bein...
متن کاملRecovery of scrap iron metal value using biogenerated ferric iron.
The utility of employing biogenerated ferric iron as an oxidant for the recycling of scrap metal has been demonstrated using continuously growing cells of the extremophilic organism Acidithiobacillus ferrooxidans. A ferric iron rich (70 mol%) lixiviant resulting from bioreactor based growth of A. ferrooxidans readily solubilized target scrap metal with the resultant generation of a leachate con...
متن کاملRecovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملcopper and nickel recovery from electroplating sludge by the process of acid-leaching and electro-depositing
in this work, we developed a method which combined the processes of acid-leaching, ammonium jarosite precipitating and electro-depositing to recover copper and nickel from electroplating sludge. residual sludge from an electroplating plant located in qingdao was used for acid-leaching, and more than 95% of copper, nickel, zinc, chromium and iron were extracted from the sludge. after acid-leachi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shigen-to-Sozai
سال: 1993
ISSN: 0916-1740,1880-6244
DOI: 10.2473/shigentosozai.109.337