Recovery of base and precious metals from scrap TV boards using zig-zag air separator
نویسندگان
چکیده
Waste of Electrical and Electronic Equipments (WEEE) is one the fastest growing waste streams in world. The treatment WEEE with high content precious metals (Au particular) has received most attention due to their economic potential. development simple, environmentally friendly cost-effective methods for recovery from “low-value” (e.g., <100 g/t Au) important circular economy perspective. In this study, separation base (Cu) (Ag) scrap TV boards (STVBs) by using a zig-zag air separator was investigated. Size-reduced STVBs (-1 mm) were subjected tests after removal fine fraction (-0.1 mm). sized material +0.1 determined have metal 15.4% Cu, 47 Ag 0.05% Fe, no gold. tests, effect flow rate (4-16 m/s) on studied. Increasing resulted low recoveries concurrent grades concentrate. Separation efficiency (%) calculations showed that efficient obtained at highest 16 m/s. At rate, recovered concentrate which contains 62.3% Cu 198 63.3% 73.9% Ag. findings indicated separators can be used obtain metal-rich under suitable conditions regime.
منابع مشابه
Recycling of Precious Metals from E-scrap
Recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and refinery operations. At the end of their use, electronic and other electrical product scrap offer an important recycling potential for the secondary supply of gold and silver...
متن کاملRecovery of high purity precious metals from printed circuit boards.
Waste printed circuit boards (WPCB) have an inherent value because of the precious metal content. For an effective recycling of WPCB, it is essential to recover the precious metals. This paper reports a promising method to recover the precious metals. Aqua regia was used as a leachant and the ratio between metals and leachant was fixed at 1/20 (g/ml). Silver is relatively stable so the amount o...
متن کاملLeaching studies for metals recovery from printed circuit boards scrap
In this paper, the leaching behavior of the major metals present in printed circuit boards waste is evaluated, aiming at its recycling by hydrometallurgy. Several leachants were compared (sulfuric, hydrochloric and nitric acids, at 2 M H concentration), at temperatures of 25oC and 90oC and 4 hours of reaction time. Sulfuric acid leaching was not very promising concerning metals dissolution bein...
متن کاملrecycling of precious metals from e-scrap
recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and refinery operations. at the end of their use, electronic and other electrical product scrap offer an important recycling potential for the secondary supply of gold and silver int...
متن کاملRecovery of precious metals from waste streams
As there is a high potential for microbe-based technologies to bring the recovery of metals from waste streams to an ecologically friendly and financially reasonable level, it is worth to invest efforts into the advancement of these biotechnologies in the future.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physicochemical Problems of Mineral Processing
سال: 2023
ISSN: ['1643-1049', '2083-3989', '2084-4735']
DOI: https://doi.org/10.37190/ppmp/168255