Recoil implantation method for ultrashallow p+/n junction formation
نویسندگان
چکیده
منابع مشابه
Electromagnetic Fast Firing for Ultrashallow Junction Formation
The creation of low resistivity, ultrashallow source/drain regions in MOS device structures requires rapid thermal processing (RTP) techniques that restrict diffusion and activate a significant percentage of the implanted dopant species. While current heating techniques depend upon illumination based heating, a new technology, electromagnetic induction heating (EMIH), achieves a rapid heating o...
متن کاملCharacteristics of pulsed plasma doping sources for ultrashallow junction formation
Plasma doping of semiconductors is being investigated for low energy ion implantation to form ultrashallow junctions. In plasma doping, ions are extracted from a quasicontinuous plasma using a pulsed bias on the substrate. Plasma-based implantation techniques have the potential for higher throughput than those attainable with conventional accelerator beamlines due to the higher current densitie...
متن کاملPolymer PN Junction by low Energy Double Implantation Technique
721 Abstract— Polymer base organic PN junction with various ion types was studied. Low-energy ion implantation technique(~keV) is very useful in physical doping on PPP(Polyparaphenylene) polymer. By double implantation, effective organic PN junction was achieved. The best obtained electrical I-V property was rectification ratio which was about 10000. However, still have problems in low junction...
متن کاملEffect of nitride sidewall spacer process on boron dose loss in ultrashallow junction formation
A nitride spacer with an underlying deposited tetraethoxysilane oxide, that behaves as a convenient etch stop layer, is a popular choice for sidewall spacer in modern complementary metal–oxide– semiconductor process flows. In this work we have investigated the effect of the silicon nitride spacer process on the boron profile in silicon and the related dose loss of B from the Si into the silicon...
متن کاملThe effect of preamorphization energy on ultrashallow junction formation following ultrahigh-temperature annealing of ion-implanted silicon
High-power arc lamp design has enabled ultrahigh-temperature sUHTd annealing as an alternative to conventional rapid thermal processing sRTPd for ultrashallow junction formation. The time duration of the UHT annealing technique is significantly reduced from those obtained through conventional RTP. This difference in time may offer the ability to maintain a highly activated ultrashallow junction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 2000
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.372120