Realization of Electrically Small, Low-Profile Quasi-Isotropic Antenna Using 3D Printing Technology
نویسندگان
چکیده
منابع مشابه
Development of A Compact and Low Profile Cavity Backed Slot Antenna Using Microstrip Gap Waveguide Technology
Proof of concept of a cavity backed slot antenna based on inverted microstrip gap waveguide (IMGW) technology is presented. Since the antenna is operating based on the first resonating mode of the cavity, it is more compact compared to the ordinary cavity backed slot antennas in which the second cavity mode is used for radiation. Furthermore, the proposed antenna element introduces lower lo...
متن کاملLow-profile, Electrically Small Meander Antenna Using a Capacitive Feed Structure
The present paper describes a capacitive feed (C-feed) for small, low-profile linear antennas. A meander line, which is the radiating element, in such antennas with a metallic back conductor electromagnetically couples a metallic feed plate placed between the meander line and the back metal (ground). This antenna has a very small leakage current on the outer surface of the coaxial cable and can...
متن کاملCharacterization of a Wideband, Low-q, Electrically Small Antenna
Using numerical and experimental techniques, a wideband, low-Q, electrically small antenna design is characterized as a function of frequency and the relati e phasing between antenna elements. The antenna demonstrates wideband operation, with a radiation Q approximately a factor of 20 below the Q-limit established by Chu for electrically small, omnidirectional antennas. 2000 John Wiley & Sons, ...
متن کاملAn Efficient Metamaterial- Inspired Electrically-small Antenna
This article presents an inexpensive, efficient, and electrically-small antenna design that is based on a metamaterial-inspired structure driven by an electrically-small semi-circular loop antenna, which is coaxially-fed through a finite ground plane. The proposed antenna system is linearly scalable over a wide frequency spectrum. The design details and radiation characteristics of the antenna ...
متن کاملConformal printing of electrically small antennas on three-dimensional surfaces.
Increasingly stringent design constraints imposed by compact wireless devices for telecommunications, defense, and aerospace systems require the miniaturization of antennas. Unlike most electronic components, which benefi t from decreased size, antennas suffer limitations in gain, effi ciency, system range, and bandwidth when their size is reduced below a quarter-wavelength. The electrical size...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2020
ISSN: 2169-3536
DOI: 10.1109/access.2020.2971316