Realization of a Distributed Bragg Reflector for Propagating Guided Matter Waves
نویسندگان
چکیده
منابع مشابه
Optically guided beam splitter for propagating matter waves.
We study experimentally and theoretically a beam splitter setup for guided atomic matter waves. The matter wave is a guided atom laser that can be tuned from quasimonomode to a regime where many transverse modes are populated, and propagates in a horizontal dipole beam until it crosses another horizontal beam at 45°. We show that depending on the parameters of this X configuration, the atoms ca...
متن کاملUltra-short distributed Bragg reflector fiber laser for sensing applications.
We present an ultra-short distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber. The entire laser is only 8.4 mm in length. The lasing threshold is less than 1 mW. The optical signal-to-noise ratio of the laser output is better than 70 dB. The laser emits two orthogonal polarization modes and generates a beat signal with signal-to-noise ratio of approximately 70 dB and 3-dB li...
متن کاملRegenerated distributed Bragg reflector fiber lasers for high-temperature operation.
This Letter presents distributed Bragg reflector (DBR) fiber lasers for high-temperature operation at 750°C. Thermally regenerated fiber gratings were used as the feedback elements to construct an erbium-doped DBR fiber laser. The output power of the fiber laser can reach 1 mW at all operating temperatures. The output power fluctuation tested at 750°C was 1.06% over a period of 7 hours. The the...
متن کاملDistributed-bragg-reflector Lasers Grown by Chemical Beam Epitaxy
KAWACHI, M. : ‘Silica-based planar lightwave circuit technologies’. hoc. 17th European Conf. on Optical Communication, 8th Int. Conf. on Integrated Optics and Optical Fibre Communication, September 1991, pp. 51-58 YALETTE, S., RENARD, S., D E W H., IADOT, 1. P., FOURNIE& A., PHILIPPE, P., GIDON, P., GROUILLET, A. M., and DESGRANGES, D.: ‘Si-based integrated optics technologies’, Solid State Tec...
متن کاملMelt-processed all-polymer distributed Bragg reflector laser.
We have assembled and studied melt-processed all-polymer lasers comprising distributed Bragg reflectors that were fabricated in large sheets using a co-extrusion process and define the cavities for dye-doped compression-molded polymer gain core sheets. Distributed Bragg reflector (DBR) resonators consisting of 128 alternating poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) layers were p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Letters
سال: 2011
ISSN: 0031-9007,1079-7114
DOI: 10.1103/physrevlett.107.230401