Reactivity control method for extended burnup of boiling water reactor fuel bundles.

Determination ofresearch reactor fuel burnup

REACTOR PHYSICS CALCULATIONS ON MOX FUEL IN BOILING WATER REACTORS (BWRs)

The loading of MOX (Mixed Oxide) fuel in BWRs (Boiling Water Reactors) is considered in this paper in a “once-through” strategy. The fuel assemblies are of the General Electric 8×8 type, whereas the reactor is of the General Electric BWR/6 type. Comparisons with traditional UOX (Uranium Oxide) fuel assemblies revealed that the loading of MOX fuel in BWRs is possible, but this type of fuel creat...

On-Line System for Monitoring of Boiling in Nuclear Reactor Fuel Assemblies

An important goal of nuclear reactor instrumentation is the continuous monitoring of the state of the reactor and the detection of deviations from the normal behaviour at an early stage. Early detection of anomalies enables one to make the necessary steps in order to prevent further damage of nuclear fuel. In the present paper, an on-line core monitoring system is described by means of which bo...

characterisation of high-burnup LWr fueL rods through gamma tomography

Modelling of Fission Gas Behaviour in High Burnup Nuclear Fuel

The safe and economic operation of nuclear power plants (NPPs) requires that the behaviour and performance of the fuel can be calculated reliably over its expected lifetime. This requires highly developed codes that treat the nuclear fuel in a general manner and which take into account the large number of in uences on fuel behaviour, e.g. thermal, mechanical, chemical, etc. Although many mature...