Reactivity at the Lithium–Metal Anode Surface of Lithium–Sulfur Batteries
نویسندگان
چکیده
منابع مشابه
Anode for Sodium-Ion Batteries
DOI: 10.1002/aenm.201500174 The continuous pulverization of alloy anodes during repeated sodiation/desodiation cycles is the major reason for the faster capacity decay. However, if these elements can form a compound (such as Sn 4 P 3 ) after each Na extraction, the pulverization of these elements can be partially repaired and the accumulation of pulverization can be terminated. Therefore, we ca...
متن کاملElectrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries
The synthesis of iron oxide nano-particles by direct thermal decomposition was studied. Simultaneous thermal analysis and Fourier transform infrared spectroscopy results confirmed the formation of iron-urea complex, and disclosed iron oxide formation mechanism. Calcination of the iron-urea complex at 200°C and 250°C for 2 hrs. resulted in the formation of maghemite along with hematite as a seco...
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملSurface‐Amorphous and Oxygen‐Deficient Li3VO4−δ as a Promising Anode Material for Lithium‐Ion Batteries
Surface-amorphous and oxygen-deficient Li3VO4-δsynthesized by simple annealing of Li3VO4 powders in a vacuum shows great enhancements in both reversible capacity and coulombic efficiency for the first discharge/charge without delicate size control and carbon coating. The results are associated with the improved charge-transfer kinetics caused by the amorphous surface of Li3VO4-δ .
متن کاملIrreversible capacities of graphite anode for lithium-ion batteries
Electrochemical impedance spectroscopy (EIS) and in-situ intrinsic resistance measurements were applied to sandwiched disk graphite electrodes to investigate the mechanism of formation of irreversible capacity during initial galvanostatic or potentiostatic lithium intercalation into graphite in four different electrolyte formulations. The stability of the solid electrolyte interphase (SEI) film...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Physical Chemistry C
سال: 2015
ISSN: 1932-7447,1932-7455
DOI: 10.1021/acs.jpcc.5b08254