Reactive processing of aluminum matrix composites
نویسندگان
چکیده
منابع مشابه
Fabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملElectrical Discharge Machining of Aluminum Metal Matrix Composites- A Review
Electrical discharge machining (EDM) is the process of machining electrically conductive materials by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. Aluminium metal matrix composites (AMMCs) refer to the class of light weight high performance aluminum ceramic material systems. The reinforcement in AMMCs could be in the f...
متن کاملSoldering of Aluminum Matrix Composites Sicp/a356 and Kovar Alloy
Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...
متن کاملInvestigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion
Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...
متن کاملInvestigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion
Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2017
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.67.571