Reactive Interdiffusion: A Method for Making Composition Graded Metal-ceramic Composites

Strength and Toughness of Ceramic-metal Prepared by Reactive Hot Pressing Composites

William G. Fahrenholtz o 9m Ceramic Engineering Department ‘so University of Missouri-Rolls w~!!l Rolls, MO 65409 + <. +# Metal-reinforced Alz03-matrix composites were prepared using reactive hot pressing. The volume fraction of the reinforcing phase was controlled by the stoichiometry of the particular displacement reaction used. Dense Alz03-Ni and Al@3-N’b composites were fabricated using thi...

Thermal buckling analysis of ceramic-metal functionally graded plates

Thermal buckling response of functionally graded plates is presented in this paper using sinusoidal shear deformation plate theory (SPT). The material properties of the plate are assumed to vary according to a power law form in the thickness direction. Equilibrium and stability equations are derived based on the SPT. The non-linear governing equations are solved for plates subjected to simply s...

Method for Making a Heavy Wax Composition

Wear of ceramic particle-reinforced metal-matrix composites

Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...

Porous Ceramic - Metal Composites Obtained by Infiltration Methods

A. Boczkowska, P. Chabera, Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw, Poland A. J. Dolata, M. Dyzia, Silesian University of Technology, Faculty of Materials Science and Metallurgy, Katowice, Poland A. Oziębło, Institute of Ceramics and Construction Materials, Katowice, Poland A pressure-vacuum infi ltration (T = 720 oC, p = 15 MPa, t = 15 min) and gas...