Reactions in Y2SiO5-SiC and Y3Al5O12-SiC in Yttrium-Silicate/Silicon Carbide Layered Composites.
نویسندگان
چکیده
منابع مشابه
Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملHigh Thermal Conductivity SiC/SiC Composites for Fusion Applications
SiC-SiC composites offer excellent potential for fusion energy as well as numerous commercial applications. High manufacturing cost and very low through-the-thickness (transverse) thermal conductivity (below 15 W/mK) hinders wider applications of SiC/SiC composites. To overcome these obstacles, a low-cost, Chemical Vapor Reaction (CVR) process was developed to fabricate crystalline, high purity...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملApplication of Electrophoretic Deposition for Interfacial Control of High-Performance SiC Fiber-Reinforced SiC Matrix (SiCf/SiC) Composites
This chapter reviews the novel fabrication process of continuous SiCf /SiC composites based on electrophoretic deposition (EPD). EPD process is very effective for achieving relatively homogeneous carbon coating with the thickness of several tens to hundreds nanometers on SiC fibers. Carbon interface with the thickness of at least 100 nm formed by EPD acts effectively for inducing interfacial de...
متن کاملModelling of high temperature interfacial reactions in continuously reinforced Ti/SiC metal matrix composites (MMCs)
Previous experimental work by Gundel and Wawner showed that the matrix alloy has a strong effect on reaction layer growth in Ti alloy/SCS-6 composite systems. A finite difference technique was used to model the reaction layer growth, which predicts the same trends as those exhibited by the experimental data. Matrix alloying elements such as Mo and Cr in metastable R alloys will affect the equil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2000
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.108.1261_861