Reaction kinetics of mechanically activated cordierite-based ceramics studied via DTA
نویسندگان
چکیده
منابع مشابه
Kinetics of Indium Extraction from Mechanically Activated ITO Scrap
The indium tin oxide scrap (ITOS) was mechanically activated by a stirring ball mill and subsequently studied for the leaching behavior and kinetics of extracting indium from ITOS in hydrochloric acid solution. The X-ray diffraction (XRD) analysis showed that MA caused the decrease in crystalline phase and increase in lattice distortion. The effects of reaction temperature and hydrochloric acid...
متن کاملQUANTITATIVE MICROSTRUCTURAL ANALYSIS AND PIEZOELECTRICITY OF HIGHLY DENSE, SUBMICRON-STRUCTURED NaNbO3 CERAMICS FROM MECHANICALLY ACTIVATED PRECURSORS
We study in this work the processing of NaNbO3 ceramics prepared in a single thermal treatment of highly reactive precursors obtained by mechanical activation of different reagents, aiming to determine optimum conditions for piezoelectric ceramics production. Pressure-less sintering at 1200oC leads to dense ceramics (<5% porosity) with poor mechanical stability, unsuitable for practical uses. D...
متن کاملSynthesis of Polybutadiene Nanoparticles via Emulsion Polymerization: Effect of Reaction Temperature on the Polymer Microstructure, Particle Size and Reaction Kinetics
Polybutadiene nanoparticles were synthesized via batch emulsion polymerization of butadiene in the presence of potassium persulfate, disproportionate rosinate potassium cation and t-dodecyl mercaptane as initiator, emulsifier and chain transfer agent, respectively. Polymerization reaction was performed at different temperatures (60, 70 and 80 °C). Conversion was measured at the various time int...
متن کاملEstimation of the mean grain size of mechanically induced Hydroxyapatite based bioceramics via artificial neural network
This study focuses on the estimation of the mean grain size of mechanically induced Hydroxyapatite (HA) through the artificial neural network (ANN) model. The mean grain size of HA and HA based nanocomposites at different milling parameters were obtained from previous studies. The data were trained and tested by the neural network modeling. Accordingly, all data (55 sets) were based on the mecha...
متن کاملMechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder
Boron carbide is one of the hardest materials. The combustion method was used to synthesize B4C-TiB2 nanocomposite powder in a B2O3-Mg-TiO2-C system. An experimental study of the formation of B4C–TiB2 nanoparticles was conducted in the thermal explosion mode. A mixture of B2O3:TiO2:Mg:C at a molecular ratio of 3:1:12:1 was chosen to obtain the B4C–TiB2. This powder mixture was milled for differ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Analysis and Calorimetry
سال: 2015
ISSN: 1388-6150,1588-2926
DOI: 10.1007/s10973-015-5132-9