Rapid synthesis of Al2O3 reinforced Fe–Cr–Ni composites
نویسندگان
چکیده
منابع مشابه
Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites
Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along wit...
متن کاملPRODUCTION OF TiAl/Al2O3 AND TiAl/Ti2AlC/Al2O3 COMPOSITES BY EXPLOSION SYNTHESIS
Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...
متن کاملFsw Of Polypropylene Reinforced With Al2o3 Nano Composites, Effect On Mechanical And Microstructural Properties
Friction stir welding is a solid state joining process first used for welding of Aluminum and its alloys, is now employed for welding of polymers and composite materials. Polypropylene (pp) is one of polymer materials used in many applications due to its good performance, high strength to weight ratio and excellent processing properties, its application is limited due to its weak abrasive prope...
متن کاملPhysio-mechanical Properties of Aluminium Metal Matrix Composites Reinforced with Al2O3 and SiC
Particulate reinforced metal matrix composites (MMCs) are potential materials for various applications due to their advantageous of physical and mechanical properties. This paper presents a study on the performance of stir cast Al2O3 SiC reinforced metal matrix composite materials. The results indicate that the composite materials exhibit improved physical and mechanical properties, such as, lo...
متن کاملGrinding of Aluminium-Based Metal Matrix Composites Reinforced with Al2O3 or SiC Particles
This paper presents results obtained from the grinding of aluminium-based metal matrix composites reinforced with either aluminium oxide (Al2O3) or silicon carbide (SiC) particles using grinding wheels made of SiC in a vitrified matrix or diamond in a resin-bonded matrix. The study used grinding speeds of 1100–2200 m min , a grinding depth of 15 m for rough grinding and 0.1–1 m for fine grindin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2003
ISSN: 0921-5093
DOI: 10.1016/s0921-5093(02)00419-7