Rapid Solidification Processing of Ag-5%Bi Alloy under Microgravity Condition inside Drop Tube
نویسندگان
چکیده
منابع مشابه
Rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys
Rapid solidification experiments, including laser remelting, melt-spinning and wedge casting, were carried out to investigate the rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys containing up to 9.0 at% Ag. For comparison, Bridgman solidification experiments of the same alloys were also carried out for growth velocities ranging from 0.02 to 4.82 mm/s, which were lower than that...
متن کاملModelling of dendritic growth during alloy solidification under natural convection
A two-dimensional (2D) lattice Boltzmann method (LBM)-cellular automaton model is presented to investigate the dendritic growth of binary alloys in the presence of natural convection. The kinetic-based LBM is adopted to calculate the transport phenomena by the evolution of distribution functions of moving pseudo-particles. To numerically solve natural convection thermal and solute transport sim...
متن کاملAlloy Development through Rapid Solidification for Soft Magnetic Application
This chapter describes different rapidly solidified processing routes of soft magnetic alloys and their properties and applications in different areas. Section-2 explains the details of process mechanism. The functions of different alloying elements are discussed with the alloy design of soft magnetic alloys in section-3. The structureproperty correlation is described in section-4. Section-5 hi...
متن کاملOverview of In Situ X-ray Studies of Light Alloy Solidification in Microgravity
Gravity has significant effects on alloy solidification, primarily due to thermosolutal convection and solid phase buoyancy. Since 2004, the European Space Agency has been supporting investigation of these effects by promoting in situ X-ray monitoring of the solidification of aluminium alloys on microgravity platforms, on earth, and in periodically varying g conditions. The first microgravity e...
متن کاملEffect of Sb Addition on the Solidification of Deeply Undercooled Ag-28.1 wt. % Cu Eutectic Alloy
Ag-28.1 wt. % Cu eutectic alloy solidifies in the form of eutectic dendrite at undercooling above 76 K. The remelting and ripening of the original lamellar eutectics result in the formation of the anomalous eutectics in the final microstructure. The addition of the third element Sb (0.5 and 1 wt. %) does not change the growth mode, but enlarges the volume fraction of anomalous eutectics because...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Computer Science and Engineering
سال: 2016
ISSN: 2475-8841
DOI: 10.12783/dtcse/cmsam2016/3653