Rapid solidification of Ni3Al by Osprey deposition
نویسندگان
چکیده
منابع مشابه
Rapid Solidification of Polymeric Fibers
A thorough understanding of crystallization kinetics for rapid polymer solidification during the fiber spinning process is a route to maximizing fiber properties while increasing production speeds. We are using theoretical, computational, and experimental models to characterize the crystallization process at the molecular, microscopic, and macroscopic levels. Polymer dependent molecular descrip...
متن کاملMultiband Transport in CoSb3 Prepared by Rapid Solidification†
Nano-grained CoSb3 was prepared by melt-spinning and subsequent spark plasma sintering. The phonon thermal conductivity of skutterudites is known to be sensitive to the kind and the amount of guest atoms. Thus, unfilled CoSb3 can serve as model compound to study the impact of a nanostructure on the thermoelectric properties, especially the phonon thermal conductivity. Therefore, a series of mat...
متن کاملTEM Characterization and Properties of Cu-1 wt.% TiB2 Nanocomposite Prepared by Rapid Solidification and Subsequent Heat Treatment
Copper matrix composite reinforced by 1wt.% TiB2 particles was prepared using in situ reaction of Cu-1.4wt.% Ti and Cu-0.7wt.% B by rapid solidification and subsequent heat treatment for 1-20 hrs at 900ºC. High-resolution transmission electron microscopy (HRTEM) characterization showed that primary TiB2 particles were formed in liquid copper. Heat treatment of as-solidified samples led to ...
متن کاملDevelopment of Metastable Solidification Structures Using the Electrospark Deposition Process
Electrospark deposition (ESD) was studied to investigate the possibility of forming non-equilibrium microstructures in Al alloy systems. The results have demonstrated that the level of supersaturation is system-dependent. The Al-10 wt% Mg system exhibited a complete supersaturation, while the Al-Si system had a supersaturation level reaching about 1wt%. The ESD process was also used to demonstr...
متن کاملModeling of Heat Flow and Solidification during Spray Deposition Process
The solidification behavior of droplets as well as spray-deposit of Al-4.5 wt% Cu alloy is simulated by modeling based on heat flow analysis. The model incorporates droplet dynamics and their thermal states during atomization process. The resultant spray enthalpy is used to analyze heat flow during solidification of the spray deposit. The effect of process variables like atomization pressure, m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research
سال: 1991
ISSN: 0884-2914,2044-5326
DOI: 10.1557/jmr.1991.0361