Rapid manufacturing of woven comingled flax/polypropylene composite structures
نویسندگان
چکیده
منابع مشابه
Development of Manufacturing Technique for Composite Structures for Robotic Applications
An experimental study was performed with the aim of developing a technique for manufacturing composite parts for use in dynamic robotic applications in lieu of heavy and expensive metal parts used in conventional robotic systems. There is already a wide usage of sandwich board materials in load bearing applications, but these do not provide equal strength in all directions, particularly compres...
متن کاملViscoelastic response of woven composite substrates
Micromechanical models are developed to predict the time and temperature dependent response of woven composite substrates used in multilayer printed circuit boards. In the first part of this study, the elastic–viscoelastic correspondence principle is applied to previously reported elastic micromechanical models. The time-dependent creep compliance of a particular composite substrate (7628 style...
متن کاملDeformation Characteristics of Composite Structures
The composites provide design flexibility because many of them can be moulded into complex shapes. The carbon fibre-reinforced epoxy composites exhibit excellent fatigue tolerance and high specific strength and stiffness which have led to numerous advanced applications ranging from the military and civil aircraft structures to the consumer products. However, the modelling of the beams undergoin...
متن کاملBuckling Analysis of Woven Glass Epoxy Laminated Composite Plate
Buckling behavior of laminated composite plates subjected to in-plane loads is an important consideration in the preliminary design of aircraft components. The sizing of many structural subcomponents of the aircraft structures is often determined by stability constraints. The objective of the current study is to understand the influence of the length-to-thickness ratio, the aspect ratio, the fi...
متن کاملCompressive response of a 3D non-woven carbon-fibre composite
The compressive response of a three-dimensional (3D) non-interlaced composite comprising three orthogonal sets of carbon fibre tows within an epoxy matrix is analysed. First, the compressive response is measured in three orthogonal directions and the deformation/failure modes analysed by a combination of X-ray tomography and optical microscopy. In contrast to traditional unidirectional and two-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Material Forming
سال: 2018
ISSN: 1960-6206,1960-6214
DOI: 10.1007/s12289-018-01464-1