Rapid Fault Diagnosis of PEM Fuel Cells through Optimal Electrochemical Impedance Spectroscopy Tests
نویسندگان
چکیده
منابع مشابه
Equivalent Electrical Circuit Modeling of Ceramic-Based Microbial Fuel Cells Using the Electrochemical Impedance Spectroscopy (EIS) Analysis
The effect of the thickness of ceramic membrane on the productivity of microbial fuel cells (MFCs) was investigated with respect to the electricity generation and domestic wastewater treatment efficiencies. The thickest ceramic membrane (9 mm) gained the highest coulombic efficiency (27.58±4.2 %), voltage (681.15±33.1 mV), and current and power densities (447.11±21.37 mA/m2, 63.82±10.42 mW/m2) ...
متن کاملError Analysis of the Impedance Response of PEM Fuel Cells
A measurement-model-based error structure analysis was applied to impedance data collected under galvanostatic modulation for a single 5 cm2 polymer electrolyte membrane PEM fuel cell. The stochastic errors were found to be roughly independent of frequency and were similar for the two instruments used. The measurement-model approach was found to be capable of identifying both high-frequency and...
متن کاملModel Based Fault Diagnosis in Pem Fuel Cell Systems
ABSTRACT: In this work, a model based fault diagnosis methodology for PEM fuel cell systems is presented. The methodology is based on computing residuals, indicators that are obtained comparing measured inputs and outputs with analytical relationships, which are obtained by system modelling. The innovation of this methodology is based on the characterization of the relative residual fault sensi...
متن کاملPEM Fuel Cell System Robust LPV model-based Fault Diagnosis
In this paper, the problem of robust fault diagnosis in a PEM Fuel Cell (PEM FC) system is addressed. Fault detection is based on a LPV interval observer able to face the variations of parameters with the operating while preserving the linear structure of the model. At the same time, this approach addresses the robustness problem against modeling uncertainty included as unknown parameters whose...
متن کاملFault-Tolerant MPC Control of PEM Fuel Cells
In this paper, fault-tolerant MPC control of PEM fuel cells is addressed. MPC is a suitable control methodology to control fuel cell systems because of their multivariable and complex behaviour. Additionally, MPC is one of the control methodologies that can introduce more easily fault-tolerance. However, the problem of including actuator fault-tolerance in the control loops of these systems has...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2020
ISSN: 1996-1073
DOI: 10.3390/en13143643