Rapid determination of zirconium in ferro-zirconium alloy by the EDTA titratin method
نویسندگان
چکیده
منابع مشابه
Synthesis of zirconium carbide nanoparticles by sol-gel method and determination of powder characteristics
In this study, zirconium carbide nanoparticles were synthesized by the sol-gel method in the alcoholic system. The sol was prepared in a three-component alkoxide-water-alcohol system based on the chemical sol-gel process under acidic conditions and at pH = 5. Zirconium n-propoxide, furfuryl alcohol were used as raw materials. After the hydrolysis process and formation of the gel, the initial po...
متن کاملZirconium nanoparticles prepared by the reduction of zirconium oxide using the RAPET method
The aim of the current work is the synthesis and characterization of metallic Zr nanoparticles. The preparation is carried out by using the RAPET method (Reaction under Autogenic Pressure at Elevated Temperatures) developed in our lab. The RAPET reaction of commercial ZrO(2) with Mg powder was carried out in a closed stainless steel cell, at 750 °C. On completion of the reaction, the additional...
متن کاملA Rapid and Practical Method for Deprotection of 1,1-Diacetates Catalyzed by Zirconium Sulfate Tetrahydrate-Silica Gel
A simple and efficient procedure for converting a variety of 1,1-diacetates into the corresponding aldehydes was developed. The methodology has been done with zirconium sulfate tetrahydrate-silica gel as catalyst. The temperature plays an important role in these reactions. The phenolic acetate function can selectively be deprotected into phenol.
متن کاملSpectrophotometric Determination of Zirconium Using Chrome Azurol
A sensitive and reproducible method for the direct spectrophotometric determination of zirconium is reported. The method is based on zirconium forms a stable bluish violet colour complex with Chrome Azurol S (CAS) which has maximum absorption at 598 nm at pH 4.2. The complex obeys Beer’s law in the concentration range of 1-7 μg/mL. Detection limit, molar absorptivity and Sandell’s sensitivity w...
متن کاملOsteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
PURPOSE The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1958
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.7.578