Railway Wheel Flat Detection System Based on a Parallelogram Mechanism
نویسندگان
چکیده
منابع مشابه
Design and Analysis of MEMS based Accelerometer for Automatic Detection of Railway Wheel Flat
This paper presents the modeling of a MEMS based accelerometer in order to detect the presence of a wheel flat in the railway vehicle. A haversine wheel flat is assigned to one wheel of a 5 DOF pitch plane vehicle model, which is coupled to a 3 layer track model. Based on the simulated acceleration response obtained from the vehicle-track model, an accelerometer is designed that meets all the r...
متن کاملRailway Wheel Flat and Rail Surface Defect Detection by Time-Frequency Analysis
Damage to the surface of railway wheels and rails commonly occurs in most railways and, if not detected at an early stage, can result in rapid deterioration and possible failure incurring high maintenance costs. If detected at an early stage these maintenance costs can be minimised. This paper presents an investigation into the use of time-frequency analysis of vibrations in railway vehicles fo...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh-
Timoshenko beam elements. The ra...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh- Timoshenko beam elements. The rail...
متن کاملNeedleless Electrospinning Using a Flat Wheel Spinneret
Nanofibers have a wide range of applications, however; the mass production of nanofibers is still an obstacle to wider industrial application. In this paper, a flat wheel was used as a spinneret for production of poly (vinyl) alcohol nanofibers. Electric field comparative analysis was done between the flat wheel and other spinnerets such as a cylinder, disk and ring. It was found the flat wheel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19163614