Radiation tolerance of neutron-irradiated model Fe–Cr–Al alloys
نویسندگان
چکیده
منابع مشابه
IMPROVING THE WELDABILITY OF FeCrAl ALLOYS THROUGH TiC ADDITIONS
FeCrAl alloys were prepared with TiC additions to act as hydrogen traps and improve resistance to hydrogen cracking. Weldability results showed that alloys with up to 20 wt% Al and 11 wt% Cr could be prepared crack-free with relatively small TiC additions of ~ 4 wt%. Thermogravimetric analysis of Fe-10Al-5Cr corrosion coupons with and without TiC has shown that the corrosion resistance is not s...
متن کامل“radiation-induced Segretation and the Relationship to Physical Properties in Irradiated Austentic Alloys”
The submitted manuscript has been created by the University of Chicago as Operator of Argonne National Laboratory (AArgonne@) under contract No. W-31-109-ENG-38 with the U. S. Department of Energy. The U.S. Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copie...
متن کاملExtraction of the 131Cs from neutron irradiated barium oxide under microwave radiation
In this work, the solubility dependence of radioactive baric samples under influence of microwave radiation (MWR) has been investigated at various concentrations of HCl after irradiation of BaO target at a flux of thermal neutrons. It is established that the use of MWR for dissolution of a sparingly-soluble barium oxide will accelerate a dissolution process at almost an order of magnitude in co...
متن کاملFast Neutron Irradiated Magnetite and Haematite Investigated by Neutron Diffraction
In this paper, we present new experimental results about crystallographic and magnetic properties obtained on magnetite Fe,04 and haematite a-FqO, samples irradiated by fast neutrons. Polycrystalline rods were irradiated at 350K by fast neutrons inside the core of Melusine nuclear reactor (CENG) in Grenoble at various fluences (4 lO", 9.2 1019 and 20 10'' neutronslcm~). The irradiated samples h...
متن کاملNeutron diffraction analysis on FINEMET alloys
Neutron diffraction has been used to study in situ the nanocrystallization process of Fe73.5Cu1Nb3Si22.52xBx (x55, 9, and 12! amorphous alloys. Nanocrystallization results in a decrease of both the silicon content and the grain size of the Fe~Si! phase with increasing value of x. By comparing the radial distribution function peak areas with those predicted for ideal bcc and DO3 structure, it ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Materials
سال: 2015
ISSN: 0022-3115
DOI: 10.1016/j.jnucmat.2015.06.023