Quick Reaction Force Control for Three-Inertia Resonant System
نویسندگان
چکیده
منابع مشابه
فرآیند کنترل در سیستم کامپیوتری تهویه مطبوع airwasher environmental control system for intelligent buildings
در این پایان نامه با استفاده از تکنولوژی روز و امکانات داخل کشور طریقه اتوماسیون سیستم تاسیساتی یک کارخانه نساجی (کارخانه نساجی اطلس پود) همراه با منوهای مربوطه و توضیحات کامل برنامه نویسی و طراحی بلوک های برنامه و سایر قسمتهای برنامه ارائه گشته است. علاوه بر این، برنامه با نمونه آمریکایی آن مقایسه و مزیت های آن نسبت به آمریکایی توضیح داده شده است. همچنین تمامی بلوک های برنامه بصورت شماتیکی بطو...
15 صفحه اولInertia-Free Spacecraft Attitude Control Using Reaction Wheels
This paper extends the continuous inertia-free control law for spacecraft attitude tracking derived in prior work to the case of three axisymmetric reaction wheels. The wheels are assumed to be mounted in a known and linearly independent, but not necessarily orthogonal, configuration with an arbitrary and unknown orientation relative to the unknown spacecraft principal axes. Simulation results ...
متن کاملPosition and Force Control by Reaction Compensation
The paper presents a new position/force controller, based on the philosophy of the parallel approach. The controller exploits the reaction compensation action of the inverse dynamics position controller and achieves superior transient performance. It incorporates a velocity dependent damping term. Stability is established and conditions for the control parameters are derived. Performance of the...
متن کاملForce Control System for Autonomous Micro Manipulation
A dexterous micro manipulation system was developed for applications such as assembling micro machines, manipulating cells, and micro surgery. We have proposed a concept of a two-fingered micro hand, and designed and built a prototype. We succeeded in performing basic micro manipulations, including the grasp, release, and rotation of a microscopic object. The micro hand is controlled with a pos...
متن کاملResonant control of an atomic force microscope micro-cantilever for active Q control.
Active Q control may be used to modify the effective quality (Q) factor of an atomic force microscope (AFM) micro-cantilever when operating in tapping mode. The control system uses velocity feedback to obtain an effective cantilever Q factor to achieve optimal scan speed and image resolution for the imaging environment and sample type. Time delay of the cantilever displacement signal is the mos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Journal of Industry Applications
سال: 2019
ISSN: 2187-1094,2187-1108
DOI: 10.1541/ieejjia.8.941