Quasistatic model for foam fractionation

Riser Design in Foam Fractionation

The growth of biotechnology has led to renewed interest in the possibility of enriching valuable bioproducts using foam fractionation. This is a separation process in which surface active molecules are separated from a solution by sparging through bubbles of gas. Adsorption of such molecules at the gas/liquid interface causes enrichment in the foam formed above the liquid pool. Previous work ha...

Downstream Processing of Proteins Using Foam Fractionation

Irregular lattice model for quasistatic crack propagation

An irregular lattice model is proposed for simulating quasistatic fracture in softening materials. Lattice elements are defined on the edges of a Delaunay tessellation of the medium. The dual sVoronoid tessellation is used to scale the elemental stiffness terms in a manner that renders the lattice elastically homogeneous. This property enables the accurate modeling of heterogeneity, as demonstr...

Foam Fractionation as a Means to Recover and Fractionate Bioactives

In this research, the optimum conditions for the separation of polyphenols from apple juice (AJ) and the separation of BSA from a BSA/water solution were found by looking at the enrichment ratio (ER) and recovery. A mixture of the AJ and BSA was also studied to see how the different conditions affect separation of either compound. For AJ only, maximum ER was achieved at a feed concentration of ...

Removal of Mercury by Foam Fractionation Using Surfactin, a Biosurfactant

The separation of mercury ions from artificially contaminated water by the foam fractionation process using a biosurfactant (surfactin) and chemical surfactants (SDS and Tween-80) was investigated in this study. Parameters such as surfactant and mercury concentration, pH, foam volume, and digestion time were varied and their effects on the efficiency of mercury removal were investigated. The re...