Quasi-Static and Harmonic Indentation of Osteonal Bone

Quasi-Static and Harmonic Indentation of Osteonal Bone

UNLABELLED The purpose of the study was to compare Quasi-Static (QS) and harmonic (CSM) methods of indentation testing. Bone sections were obtained from mid-femoral diaphyses of dogs which received a pair of calcein labels. Labeled (n = 35) and unlabeled (n = 112) osteons were identified. Indentation modulus (IM) and hardness (H) for the CSM method were collected during the entire loading cycle...

A Comparison of Low-Velocity Impact and Quasi-Static Indentation

Contact Behaviour of Composite Laminate under Quasi-Static Indentation Load

A viable solution to the ever-demanding weight-saving target in aerospace industry is the replacement of conventional engineering alloys with composite materials in primary structures. A major concern to the effective use of composite laminates is the substantial reduction in the compressive strength when the contact force has exceeded the delamination threshold load (DTL). This paper focuses o...

Quasi-static Punch Indentation of a Honeycomb Sandwich Plate: Experiments and Modelling

Punching experiments on wide honeycomb sandwich beams were performed to evaluate the predictive capabilities of a newly developed constitutive model in structural applications. The employed constitutive model for plastically com-pressible orthotropic materials accounts for both non-uniform hardening and softening associated with stressing in different directions. This feature is vital when asse...

Investigation of Quasi-Static Indentation Response of Inkjet Printed Sandwich Structures under Various Indenter Geometries

The objective of this investigation was to determine the quasi-static indentation response and failure mode in three-dimensional (3D) printed trapezoidal core structures, and to characterize the energy absorbed by the structures. In this work, the trapezoidal sandwich structure was designed in the following two ways. Firstly, the trapezoidal core along with its facesheet was 3D printed as a sin...