منابع مشابه
Stationary Lead-Acid Batteries With Selenium Alloys
Until ten years ago the grids of lead-acid batteries were usually made of lead-antimony alloys containing 5-11 wt. % antimony. The necessary mechanical strength and castability are easily achieved with this content of antimony. However, the unavoidable corrosion of the positive grid liberates antimony from the grid, which proves to be both unfavorable as well as unfavorable with respect to batt...
متن کاملSimulation Analysis of Minimum Bending Radius for Lead Frame Copper Alloys
Article history: Received 2.11.2012 Received in revised form 10.12.2012 Accepted 10.12.2012 Copper alloy has a lot of excellent properties, so it becomes an important alloy for lead frame materials for the integrated circuit. The minimum bending radius of three different copper alloys (Cu-Fe-P, Cu-Ni-Si, Cu-Cr-Sn-Zn) for lead frame materials was analyzed by using finite element. Tensile tests f...
متن کاملEXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS
Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...
متن کاملBoard Level Reliability Comparison of Lead Free Alloys
Board level reliability testing was used to compare six lead free alloys to tin-lead eutectic using a 98 ball Wafer Level Chip Scale Package (WLCSP). The component had a 0.5mm Ball Grid Array (BGA) pitch, and Al/NiV/Cu pad metallization. Thermal cycling (4 conditions), cyclic bend (2 conditions), cyclic drop (3 conditions), and solder joint array tensile testing (3 conditions) were utilized to ...
متن کاملDevelopment of Sn-Zn-Al Lead-Free Solder Alloys
Fujitsu has implemented a company-wide effort to progressively reduce the use of lead (Pb) and eventually eliminate this environmental pollutant from its products. As part of this effort, we have developed a new lead-free solder that consists of tin (Sn), zinc (Zn), and aluminum (Al) and yet offers superior productivity and joint reliability. The new lead-free solder has a melting point equival...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Spectroscopical Society of Japan
سال: 1956
ISSN: 1884-6785,0038-7002
DOI: 10.5111/bunkou.4.4_33