Quantitative characterization of acid concentration and temperature dependent self-ordering conditions of anodic porous alumina
نویسندگان
چکیده
منابع مشابه
Synthesis and Characterization of Silver and Gold Nano-Structures on Chitosan-Porous Anodic Alumina Nano-Composite
This study was designed to probe the fabrication of unique silver and gold nano-structures engaging a self-designed chitosan-porous anodic alumina nano-composite as a template. Porous anodic alumina has been manufactured by di-step aluminum anodization in an oxalic acid electrolytic bath. The surface properties of porous anodic alumina were reinforced by chitosan neutralized in sodium hydro...
متن کاملFabrication of a porous anodic alumina membrane
With the aim of developing a process for surface enlargement on an electrode for measuring brain activity attempts have been made to fabricate a porous anodic alumina membrane directly on the electrode. The porous membrane was intended to be used as scaffold for deposition of an electrically conducting polymer on the electrode surface. A silicon wafer with gold electrodes was the base onto whic...
متن کاملCylindrical Three-Dimensional Porous Anodic Alumina Networks
The synthesis of a conformal three-dimensional nanostructure based on porous anodic alumina with transversal nanopores on wires is herein presented. The resulting three-dimensional network exhibits the same nanostructure as that obtained on planar geometries, but with a macroscopic cylindrical geometry. The morphological analysis of the nanostructure revealed the effects of the initial defects ...
متن کاملDielectrophoretic assembly and atomic force microscopy modification of reduced graphene oxide
Related Articles Electrical conductivity in Li2O2 and its role in determining capacity limitations in non-aqueous Li-O2 batteries J. Chem. Phys. 135, 214704 (2011) Refinement of the theory for extracting cell dielectric properties from dielectrophoresis and electrorotation experiments Biomicrofluidics 5, 044109 (2011) Current-controlled negative differential resistance due to Joule heating in T...
متن کاملUse of Ionic Liquid in Fabrication, Characterization, and Processing of Anodic Porous Alumina
Two different ionic liquids have been tested in the electrochemical fabrication of anodic porous alumina in an aqueous solution of oxalic acid. It was found that during galvanostatic anodization of the aluminum at a current density of 200 mA/cm2, addition of 0.5% relative volume concentration of 1-butyl-3-methylimidazolium tetrafluoborate resulted in a three-fold increase of the growth rate, as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2011
ISSN: 2158-3226
DOI: 10.1063/1.3655416