Quantifying anisotropic thermal transport in two-dimensional perovskite <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:msub><mml:mi>PEA</mml:mi><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mi>PbI</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:mrow><mml:mo>)</mml:mo></mml:mrow></mml:math> through cross-sectional scanning thermal microscopy
نویسندگان
چکیده
In this paper, we investigated the anisotropic thermal transport in two-dimensional (2D) perovskite (phenethylammonium lead iodide) nanolayers through a measurement technique called cross-sectional scanning microscopy. method, target layer on substrate was oblique polished with an Ar ion beam to create low-angle wedge nanoscale roughness that is followed by high-vacuum microscopy obtain conductance map as function of local thickness. The experimentally obtained data were processed analytical model and validated finite elemental analysis simulation quantify in-plane $({k}_{l,xy})$ cross-plane conductivities $({k}_{l,z})$ 2D from single set measurements resolution. We ultralow conductivity $({k}_{l}=0.25\ifmmode\pm\else\textpm\fi{}0.05\phantom{\rule{0.16em}{0ex}}\mathrm{W}\phantom{\rule{0.16em}{0ex}}{\mathrm{m}}^{\ensuremath{-}1}\phantom{\rule{0.16em}{0ex}}{\mathrm{K}}^{\ensuremath{-}1})$ for along anisotropy $({k}_{l,\phantom{\rule{0.16em}{0ex}}xy}=0.45\ifmmode\pm\else\textpm\fi{}0.05\phantom{\rule{0.16em}{0ex}}\mathrm{W}\phantom{\rule{0.16em}{0ex}}{\mathrm{m}}^{\ensuremath{-}1}\phantom{\rule{0.16em}{0ex}}{\mathrm{K}}^{\ensuremath{-}1}\phantom{\rule{0.16em}{0ex}}\mathrm{and}\phantom{\rule{0.16em}{0ex}}{k}_{l,\phantom{\rule{0.16em}{0ex}}z}=0.13\ifmmode\pm\else\textpm\fi{}0.05\phantom{\rule{0.16em}{0ex}}\mathrm{W}\phantom{\rule{0.16em}{0ex}}{\mathrm{m}}^{\ensuremath{-}1}\phantom{\rule{0.16em}{0ex}}{\mathrm{K}}^{\ensuremath{-}1})$ linked unique structure different phonon lifetimes group velocities out-of-plane directions. results are available essential management perovskite-based optoelectronic devices potential thermoelectric applications these materials.
منابع مشابه
Micro-thermal analysis: scanning thermal microscopy and localised thermal analysis.
Micro-thermal analysis combines the imaging capabilities of atomic force microscopy with the ability to characterise, with high spatial resolution, the thermal behaviour of materials. The conventional AFM tip is replaced by a miniature heater/thermometer which enables a surface to be visualised according to its response to the input of heat (in addition to measuring its topography). Areas of in...
متن کاملCross-sectional scanning thermal microscopy of ErAs/GaAs superlattices grown by molecular beam epitaxy.
Scanning thermal microscopy has been implemented in a cross-sectional geometry, and its application for quantitative, nanoscale analysis of thermal conductivity is demonstrated in studies of an ErAs/GaAs nanocomposite superlattice. Spurious measurement effects, attributable to local thermal transport through air, were observed near large step edges, but could be eliminated by thermocompression ...
متن کاملCross-Sectional Scanning Tunneling Microscopy.
Since its invention in the early 1980, scanning tunneling microscopy1-4 (STM) and techniques such as atomic force microscopy5 (AFM) that have evolved from it have become tools of paramount importance in fundamental studies of surfaces. In addition, increasing effort has been directed towards the use of STM and related techniques to address problems of technological interest, particularly in the...
متن کاملSize Dependence and Ballistic Limits of Thermal Transport in Anisotropic Layered Two-Dimensional Materials
Zuanyi Li,1,2 Yizhou Liu,3,4 Lucas Lindsay,5,† Yong Xu,3 Wenhui Duan,3,4 and Eric Pop1,* 1Electrical Engineering, Stanford University, Stanford, California 94305, USA 2Department of Physics, University of Illinois, Urbana-Champaign, Illinois 61801, USA 3Dept. of Physics and State Key Laboratory of Low-Dimensional Quantum Physics, Tsinghua University, Beijing 100084, P.R. China 4Collaborative In...
متن کاملAnisotropic thermal transport in MOF-5 composites
Metal-organic frameworks (MOFs) are a new class of porous, crystalline materials with applications in the capture, storage, and separation of gasses. Although much effort has been devoted to understanding the properties of MOFs in powder form, in a realistic system the MOF media will likely be employed as dense compacts, such as pucks or pellets, to maximize volumetric efficiency. In these appl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Materials
سال: 2023
ISSN: ['2476-0455', '2475-9953']
DOI: https://doi.org/10.1103/physrevmaterials.7.023801