Quantification of processing artifacts in textile composites
نویسندگان
چکیده
منابع مشابه
Models for Textile Composites Forming
INTRODUCTION Drape of dry fabrics or prepregs was recognised as an important feature in composites forming operations from the start. In the 1950s the first mathematical models were developed based on purely kinematic arguments. The assumption of zero fibre strains and trellis deformations led to the socalled fishnet approach. Typically, these methods require certain arbitrary constraints to re...
متن کاملFriction in Textile Thermoplastic Composites Forming
A previously developed mesoscopic friction model for glass/PP textile composite laminates during forming is evaluated for glass and carbon/PPS laminates, at higher temperatures and lower viscosities than before. Experiments were performed for tool/ply and ply/ply configurations in a new friction test set-up. The experimental results indicate that this contact is indeed in the hydrodynamic regim...
متن کامل“Solar and Thermal Energy Harvesting Textile Composites
Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this coll...
متن کامل3D Geometric and Haptic Modeling of Hand-Woven Textile Artifacts
Haptic Modeling of textile has attracted significant interest over the last decade. In spite of extensive research, no generic system has yet been proposed. The majority of the haptic models developed in the previous work assume a 2D mesh model for the textile which does not represent the real geometric configuration of the textile. In addition, they are based on empirical parameters obtained f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Manufacturing
سال: 1993
ISSN: 0956-7143
DOI: 10.1016/0956-7143(93)90007-u