Quantification of Large Deformation with Punching in Dual Phase Steel and Change of its’ Microstructure – Part III: Micro-tensile Behavior of Pre-strained Dual-phase Steel
نویسندگان
چکیده
منابع مشابه
Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel
The effect of the initial microstructure and intercritical annealing on mechanical properties and work-hardening response of a high-formability low carbon steel were studied. The work-hardening analysis was based on the modified Crussard–Jaoul method. The ferritic-pearlitic sheets showed low strength and high total elongation with the appearance of the yield point phenomenon. The occurrence of ...
متن کاملDamage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملHeat treatment and mechanical properties of low-carbon steel with dual-phase microstructure
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel. Design/methodology/approach: The heat treatment of the C-Mn steel in order to obtain a dual-phase ferritic – martensitic structure of desirable phase fractions was realized. To investigate the influence of heat treatment p...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2016
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane.tetsu-2015-085