Pyrolysis oil production from polypropylene plastic waste using molybdenum modified alumina-silica catalysts
نویسندگان
چکیده
منابع مشابه
Utilization of Alumina Waste and Silica Waste for Geopolymer Production
This research studies the utilization of alumina waste and silica waste for geopolymer production. Alumina waste was obtained from aluminium thermal metallurgy industry, silica waste was obtained from silicone recycle industry in Thailand. This present study aimed at investigating the basic physical and chemical properties of waste materials and also the optimal proportion in geopolymer product...
متن کاملPyridine Adsorption on Molybdenum Oxide-Alumina Catalysts
The adsorption of pyridine on a complete monolayer molybdenum oxide-Al203 catalyst was studied. Both Lewis and Bronsted acid sites are present on a catalyst with a Mo valence of -4.1. The orientation of adsorbed pyridine was studied by means of its interaction with surface OD groups, which leads to the formation of only 2-deuteriopyridine. The fraction of molybdenum ions active for hydrogenatio...
متن کاملOptimization and Prediction of Reaction Parameters of Plastic Pyrolysis oil Production Using Taguchi Method
Design of Experiments (DoE) is a powerful guiding tool that can help researchers to identify the main variables that affect the performance characteristics. The present paper elaborates on the optimization and prediction of reaction parameters like type of plastic, catalyst, and temperature using Taguchi’s L9 orthogonal array method with three levels and three parameters to obtai...
متن کاملMesoporous silica-supported zirconocene catalysts for highly isotactic polypropylene.
A new bis(indenyl)zirconocene bearing a pendant Si-Cl anchor has been grafted onto MCM-41, SBA-15, MCM-48 and a disordered mesoporous silica for the polymerisation of ethylene and propylene, producing polymers with very high molecular weights, low polydispersities and, in the case of polypropylene, higher levels of isotacticity than obtainable with analogous homogeneous systems.
متن کاملInfluence of silica–alumina support ratio on H2 production and catalyst carbon deposition from the Ni-catalytic pyrolysis/reforming of waste tyres
The influence of catalyst support alumina-silica in terms of different Al2O3 to SiO2 mole ratios containing 20 wt.% Ni on the production of hydrogen and catalyst coke formation from the pyrolysis-catalysis of waste tyres is reported. A two-stage reactor system was used with pyrolysis of the tyres followed by catalytic reaction. There was only a small difference in the total gas yield and hydrog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2019
ISSN: 2267-1242
DOI: 10.1051/e3sconf/201912201005