Pyrolysis of Waste Polyolefins into Liquid Petrochemicals Using Metal Carbonate Catalyst
نویسندگان
چکیده
منابع مشابه
Catalyst-assisted Conversion of Pyrolysis Bio-oil into Fuels
The aldol condensation of model compounds furfural and acetone on the selected base catalysts have been performed. The activity of MgO was compared with industrially produced hydrotalcite and the series laboratory prepared hydrotalcites. Si×MAl2O4 hydrotalcites (M = Mg, Zn, Ni, Co, Cu, and Fe) were prepared by the solgel method at low calcination temperature of 300°C. The properties of the cata...
متن کاملCatalytic Pyrolysis of Waste Tyre Rubber into Hydrocarbons Via Base Catalysts
The waste tyres represent a source of energy and valuable hydrocarbon products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. The effects of basic catalysts (MgO and CaCO3) were studied on the pyrolysis products. The distribution ratio of gas, liquid and char with MgO and CaCO3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % r...
متن کاملPyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene
Polyolefin, as one of the most widely used macromolecule materials, has been one of the most serious threats to the environment. Current treatment methods of waste polyolefin including landfill, incineration, and thermal degradation have suffered from severe problems such as secondary pollution and the generation of other toxic substances. In this article, we report for the first time a high-ef...
متن کاملCatalytic Pyrolysis of Wild Reed over a Zeolite-Based Waste Catalyst
Fast catalytic pyrolysis of wild reed was carried out at 500 ̋C. Waste fluidized catalytic cracking (FCC) catalyst disposed from a petroleum refinery process was activated through acetone-washing and calcination and used as catalyst for pyrolysis. In order to evaluate the catalytic activity of waste FCC catalyst, commercial HY zeolite catalyst with a SiO2/Al2O3 ratio of 5.1 was also used. The b...
متن کاملPyrolysis-catalysis of waste plastic using a nickel-stainless-steel mesh catalyst for high-value carbon products.
A stainless-steel mesh loaded with nickel catalyst was produced and used for the pyrolysis-catalysis of waste high-density polyethylene with the aim of producing high-value carbon products, including carbon nanotubes (CNTs). The catalysis temperature and plastic-to-catalyst ratio were investigated to determine the influence on the formation of different types of carbon deposited on the nickel-s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineered science
سال: 2022
ISSN: ['2576-988X', '2576-9898']
DOI: https://doi.org/10.30919/es8d699