Pyrolysis-gas chromatography of poly-butadiene and copoly-butadiene-acrylonitrile
نویسندگان
چکیده
منابع مشابه
Degradation of acrylonitrile-butadiene-styrene and polycarbonate by UV irradiation
The eects of ultra-violet irradiation on the microstructure of an oxygen free polymer viz., acrylonitrile-butadiene-styrene and a polymer containing oxygen viz., polycarbonate have been investigated using positron annihilation lifetime measurement. Lifetime results in both polymers in the early stages of irradiation indicate that chain-scission leading to free radical formation is the predomin...
متن کاملsynthesis of ethylene bis-stearamide for acrylonitrile-butadiene-styrene polymer
ethylene bis-stearamide is one of the important acrylonitrile-butadiene-styrene ()abs)( polymer additives, which is used as lubricant, slip agent and mold release agent. in this research, ethylene bis-stearamide for abs application was synthesized using stearic acid and ethylene diamine under reflux condition. refluxing prevented ethylenediamine from evaporation and thus the initial molar ratio...
متن کاملPreparation and Characterization of Binary and Ternary Blends with Poly(Lactic Acid), Polystyrene, and Acrylonitrile-Butadiene-Styrene
Binary and ternary blends of poly(lactic acid) (PLA), polystyrene (PS) and acrylonitrile-butadiene-styrene (ABS) were prepared using a one-step extrusion process. Rheological and mechanical properties of the prepared blends were determined. Rheological properties were studied using a capillary rheometer, shear rate, shear stress, non-Newtonian index, shear viscosity and flow activation energy w...
متن کاملFabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance
In the current research, ABS-co-PEG nanofiltration membrane was prepared by solution casting technique using N, N dimethyl acetamide as solvent. The effect of PEG concentration as additive in the casting solution on membrane flux, salt rejection, phase inversion time, water content, membrane porosity, membrane tensile strength and fouling was studied. Also the eff...
متن کاملThe reactivity of 1,3-butadiene with butadiene-derived popcorn polymer.
Adiabatic calorimetry performed on butadiene-derived popcorn polymer samples from industrial facilities has revealed exothermic behavior accompanied by non-condensible gas production, indicative of possible decomposition, at elevated temperatures. In the presence of low concentrations of 1,3-butadiene, reactivity is observed at temperatures of 60-70 degrees C; that is, 20-30 degrees C below tho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1972
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.21.326