Purity of Cathodic Copper Deposited from Bronze Anode
نویسندگان
چکیده
منابع مشابه
characterization of copper anode slimes from bicc
anode slimes are a by-product of the electrolytic copper refining process, which contain the precious and other important metals .in order to find a suitable method for treating these materials it is necessary to know their phase composition. for the separation of various phases from the complexmixture of copper anode. slime, the slime is leached in various steps and the residues of each step a...
متن کاملLow Resistive Copper Thin Film Deposited with Ultra-high Purity Target and Ecr-ion Beam Sputtering
A thin film process using ECR-ion beam sputtering with ultra pure (99.999999%) copper target was investigated for improving transportation properties in the film. The electric resistivity of the thin film was 40% lower than that of using a commercial-grade purity target. And the optical qualities evaluated by the transmission and reflection spectrum measurements were also indicate slower relaxa...
متن کاملA review of galvanic anode cathodic protection design procedure
Electrochemistry is a physical science. As a general definition physical sciences apply mathematical equations, making some assumptions in order to predict/explain phenomena/mechanism occurring in the natural environment. The mechanism of cathodic protection in seawater has been covered exhaustively elsewhere and the intent of this paper is to focus on the procedure of the galvanic (sacrificial...
متن کاملHydrochemically separation of gold from Copper Anode Slime by means of Thiourea solution
However, the conventional gold recovery process is cyanidation, due to the recent environmental laws; researchers are looking for alternative methods for the recovery of gold. Furthermore, the copper anode slime is one of the most important secondary sources of gold (about 1200 ppm). So, the main objective of the current work is gold separation from copper anode slime as a rich secondary source...
متن کاملMacroparticles in films deposited by steered cathodic arc
The macroparticle content of titanium films deposited using a steered vacuum cathodic arc has been investigated. It has been found that the macroparticle number decreases with increasing steering magnetic field strength, and experimental results are found to be consistent with the model in which the number and mass of macroparticles arising from a cathode spot are proportional to the cathode sp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1958
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.61.313