Punching Shear Strength Development of Bubble Deck Using FRP Stirrups
نویسندگان
چکیده
منابع مشابه
Prediction of shear strength of FRP-reinforced concrete beams without stirrups based on genetic programming
Article history: Received 31 December 2010 Received in revised form 9 February 2011 Accepted 14 February 2011 Available online 24 March 2011
متن کاملImproving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets
This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...
متن کاملStrength of Footing with Punching Shear Preventers
The punching shear failure often governs the strength of the footing-to-column connection. The punching shear failure is an undesirable failure mode, since it results in a brittle failure of the footing. In this study, a new method to increase the strength and ductility of the footing was proposed by inserting the punching shear preventers (PSPs) into the footing. The validation and effectivene...
متن کاملPunching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
متن کاملCan Stirrups Suppress Size Effect on Shear Strength of RC Beams?
This paper demonstrates the size effect on the shear strength of reinforced concrete (RC) beams with stirrups and does so in two separate and independent ways: (1) by fracture mechanics, based on finite-element analysis calibrated by a large beam test; and (2) by purely statistical analysis in which a newly assembled database of 234 tests is filtered to eliminate spurious size effects caused by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2019
ISSN: 2321-9653
DOI: 10.22214/ijraset.2019.5607