Punching Shear Resistance of Corroded Slab–Column Connections Subjected to Eccentric Load

نویسندگان

چکیده

Due to the use of deicing salt, marine and offshore environments may cause rebar corrosion in RC flat-slab floor systems. This increases possibility punching shear failure slab–column connections. However, few research results are available for connections with corroded under eccentric load, which is very common realistic loading conditions. To fill this gap, 15 full-scale flat were fabricated tested investigate performance load. The design variables included reinforcement ratio, eccentricity, degree corrosion. There two stages experimental process, including (1) accelerated tests; (2) quasi-static tests. It was found from test that, general, had detrimental effects on strength stiffness In addition, change mode it unexpected that energy-dissipating capacity deformation high ratio small eccentricity increased increasing degree.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Meniscal shear stress for punching.

AIM Experimental determination of the shear stress for punching meniscal tissue. METHODS Meniscectomy (surgical treatment of a lesion of one of the menisci) is the most frequently performed arthroscopic procedure. The performance of a meniscectomy is not optimal with the currently available instruments. To design new instruments, the punching force of meniscal tissue is an important parameter...

متن کامل

Strength of Footing with Punching Shear Preventers

The punching shear failure often governs the strength of the footing-to-column connection. The punching shear failure is an undesirable failure mode, since it results in a brittle failure of the footing. In this study, a new method to increase the strength and ductility of the footing was proposed by inserting the punching shear preventers (PSPs) into the footing. The validation and effectivene...

متن کامل

Behaviour of Corroded Single Stud Shear Connectors

In this study, the effect of corrosion on the static behavior of stud shear connectors was investigated. An innovative test setup for single stud shear connectors was designed and established. Two series of specimens having different stud diameters were fabricated and tested. The test specimens were firstly corroded to different corrosion rates by the electronic accelerating method. Static load...

متن کامل

A Proposed Method to Evaluate Ultimate Resistance of Plate Girders Subjected to Shear and Patch Loading (RESEARCH NOTE)

Experimental investigation of the ultimate resistance of slender, steel-plate girder web panels to combined shear-and-patch loading indicates significant interaction between shear loading and patch loading. However, an existing interaction formula is based on experimental results. Herein, an improved design procedure for slender plate girders subjected to combined shear and patch loading is pro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Structural Engineering-asce

سال: 2023

ISSN: ['0733-9445', '1943-541X']

DOI: https://doi.org/10.1061/(asce)st.1943-541x.0003504