Punching Shear Behavior of Shear Reinforced Slab–Column Connection with Varying Flexural Reinforcement

Experimental Investigation on Shear Cracking Behavior in Reinforced Concrete Beams with Shear Reinforcement

This paper presents an experimental investigation to clarify shear cracking behavior of reinforced concrete beams. The effects of the various influential parameters on the spacing between shear cracks and the relationship between shear crack width and stirrup strain at the intersection with shear cracks were carefully investigated. It was found that shear crack width proportionally increases wi...

Punching shear capacity of reinforced concrete slabs with headed shear studs

Numerical Analysis of Punching Shear Failure of Reinforced Concrete Slabs

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for l...

Punching shear strength of steel fibre reinforced concrete slabs

The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

Strength of Footing with Punching Shear Preventers

The punching shear failure often governs the strength of the footing-to-column connection. The punching shear failure is an undesirable failure mode, since it results in a brittle failure of the footing. In this study, a new method to increase the strength and ductility of the footing was proposed by inserting the punching shear preventers (PSPs) into the footing. The validation and effectivene...