Punching shear behavior of recycled aggregate reinforced concrete slabs

Numerical Analysis of Punching Shear Failure of Reinforced Concrete Slabs

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for l...

Punching shear strength of steel fibre reinforced concrete slabs

The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

Punching shear capacity of reinforced concrete slabs with headed shear studs

Study Punching Shear of Steel Fiber Reinforced Self Compacting Concrete Slabs by Nonlinear Analysis

This paper deals with behavior and capacity of punching shear force for flat slabs produced from steel fiber reinforced self compacting concrete (SFRSCC) by application nonlinear finite element method. Nonlinear finite element analysis on nine slab specimens was achieved by using ANSYS software. A general description of the finite element method, theoretical modeling of concrete and reinforceme...

Performance of Continuously Reinforced Concrete Pavement Containing Recycled Concrete Aggregate

In 1995, the Texas Department of Transportation (TxDOT) began reconstruction in Houston on a section of IH-10 with continuously reinforced concrete pavement (CRCP). The unique aspect of this project was the use of crushed concrete as both coarse and fine aggregates in the new concrete. No virgin aggregates were used. The primary objectives of this study were to evaluate (1) the material propert...