Pulsed Laser Irradiation for Triggered Discharge in Arc Welding System

Hybrid Laser-Arc Welding

Control of pulsed gas metal arc welding

This paper presents a control system for manual pulsed Gas Metal Arc Welding (GMAW). This system consists of a current controller, which makes it possible to shape the current during welding, and two important components, which are the key issues discussed in this paper. These components include an arc length controller and a metal transfer controller. The arc length controller is based on a no...

Arc Shape Characteristics with Ultra-High-Frequency Pulsed Arc Welding

Arc plasma possesses a constriction phenomenon with a pulsed current. The constriction is created by the Lorentz force, the radial electromagnetic force during arc welding, which determines the energy distribution of the arc plasma. Welding experiments were carried out with ultra-high-frequency pulsed arc welding (UHFP-AW). Ultra-high-speed camera observations were produced for arc surveillance...

Perspective on Double Pulsed Gas Metal Arc Welding

Aluminum alloy welding suffers from problems such as solidification cracking and hydrogen-induced porosity, which are sufficiently severe to limit its potential applications. Because mitigated porosity incidence and solidification cracking are observed in aluminum welds using double pulsed gas metal arc welding (DP-GMAW), a comprehensive review of the mechanism is necessary, but absent from the...

Macroparticle Charging in a Pulsed Vacuum Arc Thruster Discharge

A pulsed vacuum arc discharge emits a plasma as well as macroparticles in the form of micron-sized molten droplets of cathode material. Due to their trajectory and size, these macroparticles often pose a contamination threat for both spacecraft-based thrusters, and thin film deposition systems. The charge of these macroparticles was experimentally measured, and compared to a model based on ther...