Pulsed direct current magnetron sputtered nanocrystalline tin oxide films

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nano-structured morphological features of pulsed direct current magnetron sputtered Mo films for photovoltaic applications

Historically, molybdenum thin films have been used as the back contact for Cu(In,Ga)Se2 based solar cells and as such the properties of these layers play an important role in the overall cell structure. This paper describes the production of molybdenum films using pulsed d.c magnetron sputtering from compressed molybdenum powder targets. The films were deposited at different substrate temperatu...

متن کامل

Venting temperature determines surface chemistry of magnetron sputtered TiN films

Surface properties of refractory ceramic transition metal nitride thin films grown by magnetron sputtering are essential for resistance towards oxidation necessary in all modern applications. Here, typically neglected factors including exposure to residual process gases following the growth and the venting temperature Tv, each affecting the surface chemistry, are addressed for the first time. I...

متن کامل

Characterization of Magnetron Sputtered Coatings by Pulsed Eddy Current Techniques

A method that uses induced pulsed eddy currents for characterization of thick magnetron sputtered Nb coatings on steel is presented in this paper. The objectives of this work are to develop a system for rapid quantitative nondestructive inspection of coatings as well as to determine the correlation between coating properties, such as density and purity, and eddy current measured resistivity of ...

متن کامل

Characterization of bias magnetron sputtered tantalum oxide films for capacitors

Tantalum oxide films have been deposited by sputtering of tantalum target in an oxygen partial pressure of 2x10 mbar under various substrate bias voltages in the range from 0 to -150 V on glass and silicon substrates held at room temperature. The influence of substrate bias voltage on the chemical binding configuration, crystallographic structure, electrical and dielectric properties has been s...

متن کامل

Development of Zirconium Thin Films by Pulsed Direct Current Magnetron Sputtering: Effect of Pulsed Parameters

This paper characterizes phases present in thin Zr films at 773 K of substrate temperature. The effect of pulsed parameters such as pulse frequency, duty cycle and pulse power during the deposition of Zr film on Si(100) at the substrate temperature of 773 K has been studied. Formation of α-phase of zirconium was noticed with (001) preferred orientation at 773 K. Preferred orientation was found ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied Surface Science

سال: 2012

ISSN: 0169-4332

DOI: 10.1016/j.apsusc.2012.05.112