Pulse Pressuring Diffusion Bonding of Ti Alloy/Austenite Stainless Steel Processed by Surface Self-nanocrystallization
نویسندگان
چکیده
منابع مشابه
Surface Nanocrystallization of Stainless Steel with ZAF Method and SEM Technique
From a nano electronic circuit designer’s point of view the growth of ultrathin film in the ultra high vacuum chamber (UHVC) would imply better stainless steel structure. ZAF method and SEM (scanning Electron Microscopy) technique are used to realize surface nano crystallizafion on an stailness steel sample. The as-welded condition of UHVC is also studied to see if this chamber can prevent weld...
متن کاملEFFECT OF DIFFUSION ANNEALING ON PROPERTIES OF TI/304L STAINLESS STEEL EXPLOSION CLAD
In this study, commercially pure titanium/304L stainless steel explosion bonded clads have been annealed under argon atmosphere over the temperature range of 700-900°C for 1h.Microstructure of the clads have been investigated before and after anealing. X-ray diffraction studies revealed that the annealing products in the form of intermetallic phases were gradually formed at the interface of the...
متن کاملJoining of TiAl to Steel by Diffusion Bonding with Ni/Ti Reactive Multilayers
Dissimilar diffusion bonds of TiAl alloy to AISI 310 stainless steel using Ni/Ti reactive multilayers were studied in this investigation. The Ni and Ti alternating layers were deposited by d.c. magnetron sputtering onto the base materials, with a bilayer thickness of 30 and 60 nm. Joining experiments were performed at 700 and 800 ̋C for 60 min under pressures of 50 and 10 MPa. The effectiveness...
متن کاملNanocrystallization in the Duplex Ti-6Al-4V Alloy Processed by Multiple Laser Shock Peening
Laser shock peening of titanium alloys has been widely applied in the aerospace industry. However, little is known of the nanocrystalline formation characteristics and mechanisms. In this investigation, a nanocrystalline layer was formed in the duplex Ti-6Al-4V titanium alloy surface region by means of multiple pulsed laser shock peening (LSP). The phase transition and residual stress character...
متن کاملSolid-State Diffusion Bonding of Commercially pure Titanium and Precipitation Hardening Stainless steel
Solid-state direct diffusion bonding of commercially pure Titanium (Cp-Ti) and precipitation hardening stainless steel (PHSS) has been carried out in the temperature range of 800°C to 1000°C with an interval of 50°C for 3.6 ks under 3.5 Mpa uniaxial load in (4 to 6)×10 Pa vacuum. The effects of temperatures have been investigated with reference to bond strength. The examination revealed that th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2009
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.49.86