Pulse Heat Treatment of FINEMET Alloys Under Tension
نویسندگان
چکیده
منابع مشابه
Neutron diffraction analysis on FINEMET alloys
Neutron diffraction has been used to study in situ the nanocrystallization process of Fe73.5Cu1Nb3Si22.52xBx (x55, 9, and 12! amorphous alloys. Nanocrystallization results in a decrease of both the silicon content and the grain size of the Fe~Si! phase with increasing value of x. By comparing the radial distribution function peak areas with those predicted for ideal bcc and DO3 structure, it ca...
متن کاملEffect of Heat Treatment Time on the Characteristics of Coating Formed on Nanocrystalline Finemet Foils
In the present research, amorphous Fe73.5Si13.5B9Nb3Cu1 Finemet foils, 21-26µm in thickness and 5mm in width, were prepared by Planar Flow Casting (PFC) process. Wound cores of amorphous Finemet foils were simultaneously annealed and heat treated at 540°C for 60, 120 and 240 minutes in steam and air flow to form oxide insulating coating layer on both surfaces of the foils. The structure of nano...
متن کاملStudy of Crystallization Process in V-substituted Finemet Alloys
Nanocrystalline soft magnetic alloys can be produced by partial crystallization of amorphous precursor. The aim of this paper was to study the influence of Nb substitution by vanadium (V) in Fe73.5Cu1Nb3-xVxB9Si13.5 (x=1.5, 3) alloys on their crystallization process and the glass forming ability because the growth of the α-Fe(Si) crystals is reduced by (Nb) diffusion barrier. Amorphous ribbons ...
متن کاملHeat Treatment of Dental Alloys: A Review
Metallic materials have widespread use in dentistry for clinical treatment and restoration of teeth. Major areas of usage are: (1) restorative dentistry and prosthodontics (dental amalgam and gold alloy restorations for single teeth, metallic restorations for multiple teeth, including metal-ceramic restorations, removable partial denture frameworks, and dental implants), (2) orthodontics (wires...
متن کاملZinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2014
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.126.100