Pulse electro co-deposition of submicron-sized TiC reinforced Ni–W coatings: tribological and corrosion properties

Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings

Titanium nitride thin films were grown on 304 stainless steel substrates at various nitrogen/argon flow ratios by ion beam sputtering (IBS) technique. The current research is a follow up study on the influence of gas ratio on structural and corrosion properties in the TiN coated 304 stainless steel. Film structural identification of phases was performed using X-ray diffractometry (XRD). Sca...

EFFECTS OF CO-DEPOSITION OF CR2O3 AND MoS2 ON CORROSION PROPERTIES OF NANOCOMPOSITE ELECTROLESS NICKELCOATING

Abstract: Electroless Nickel (EN) composite coatings embedded with Cr2O3 and/or MoS2 particles were deposited to combine the characters of both Cr2O3 and MoS2 into one coating in this study. The effects of the co-deposited particles on corrosion behavior of the coating in 3.5% NaCl media were investigated. The results showed that both Ni-P and Ni-P composite coatings had significant improvement...

Tribological Properties of Metallic and Ceramic Coatings

23.

Corrosion Performance and Tribological Properties of Carbonitrided 304 Stainless Steel

An Investigation of Tribological Properties of CN and TiCN Coatings

Today the tool industry on a worldwide basis uses hard, wear-resistant, and low-friction coatings produced by different processes such as electrochemical or electroless methods, spray technologies, thermochemical, chemical-vapor deposition (CVD), and physical vapor deposition (PVD). In the current work, two different coatings, nitrocarburized (CN) and titanium carbonitride (TiCN) on M2-grade to...