Pullout Tests Using Modified Direct Shear Test Setup for Measuring Soil–Geosynthetic Interaction Parameters
نویسندگان
چکیده
منابع مشابه
Studying the effect of roughness on soil-geotextile interaction in direct shear test
Abstract One of the methods of increasing soil resistance against failure is soil reinforcement using geosynthetics. Soil-geosynthetic interactions are of great importance and are affected by friction and adhesion at their interface. Soil gradation, contact surface roughness and geotextile density are among the factors affecting soil-geotextiles interaction this study, to investigate the eff...
متن کاملevaluation of mechanical behaviour of sandstone and andesibasalt rockfill materials using triaxial & direct shear tests
the mechanical behaviour of rockfill materials and aggregates depends not only on particle size and compaction, but also on their strength and lithological properties. in this research two types of large triaxial and direct shear tests are performed on rockfill materials. this paper compares the stress-strain behaviour of sandstone and andesibasalt materials in triaxial compression tests (3006...
متن کاملCalibration of Bar-Concrete Bond Stress Relationships for Bond Stress Prediction of GFRP Soil Nails Using Experimental Pullout Tests
Even though steel bar is a conventional reinforcement in soil stabilization systems, the problem of corrosion of steel may lead to vast damages especially in aggressive environments. In the past decades, Fiber Reinforced Polymer (FRP) materials have offered an effective solution to overcome the corrosion problem. Despite numerous bond stress-displacement models for reinforcements in concrete, t...
متن کاملNumerical investigation on the pullout shear strength of soil-nail interface using finite element method
Soil nailing is a popular reinforcement method for stabilizing slopes, excavations, and retaining walls in many countries. The pullout capacity of the soil-nail interface is a critical parameter for the design and safety assessment of soil-nailed systems. In this paper, a three-dimensional (3D) finite element (FE) model is developed using the commercial program ABAQUS to simulate the pullout te...
متن کاملThree-Dimensional Discrete Element Simulations of Direct Shear Tests
Using discrete element methods, geotechnical engineers can create “virtual laboratories” to simulate conventional laboratory tests. In this study, three-dimensional DEM simulations of direct shear tests are coupled with equivalent physical tests on steel balls. The macro-scale response of simulations is compared with the physical test results to validate the discrete element model and to gain i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Geosynthetics and Ground Engineering
سال: 2016
ISSN: 2199-9260,2199-9279
DOI: 10.1007/s40891-016-0050-x