Pullout Capacity Of Cylindrical Block Embedded In Sand
نویسندگان
چکیده
منابع مشابه
Pullout Capacity of Model Piles in Sand
A large scale experimental program using vertical and batter model piles in sand subjected to pull out loads has been carried out in a model tank of size 1m x 1m x 1m. Mild steel pipes of varying diameters, lengths, and shapes are used as model piles. A poorly graded river sand having specific gravity G= 2.67, Uniformity coefficient= 3.53, emax = 0.81, emin = 0.54 has been used as foundation me...
متن کاملPullout capacity of batter pile in sand
Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimat...
متن کاملNeural Prediction of Buckling Capacity of Stiffened Cylindrical Shells
Estimation of the nonlinear buckling capacity of thin walled shells is one of the most important aspects of structural mechanics. In this study the axial buckling load of 132 stiffened shells were numerically calculated. The applicability of artificial neural networks (ANN) in predicting the buckling capacity of vertically stiffened shells was studied. To this end feed forward (FF) multi-layer ...
متن کاملclay reinforcement using geogrid embedded in thin layers of sand
large size direct shear tests (i.e.300 x 300mm) were conducted to investigate the interaction between clay reinforced with geogrids embedded in thin layers of sand. test results for the clay, sand, clay-sand, clay-geogrid, sandgeogrid and clay-sand-geogrid are discussed. thin layers of sand including 4, 6, 8, 10, 12 and 14mm were used to increase the interaction between the clay and the geogrid...
متن کاملComparison and prediction of pullout strength of conical and cylindrical pedicle screws within synthetic bone
BACKGROUND This study was designed to derive the theoretical formulae to predict the pullout strength of pedicle screws with an inconstant outer and/or inner diameter distribution (conical screws). For the transpedicular fixation, one of the failure modes is the screw loosening from the vertebral bone. Hence, various kinds of pedicle screws have been evaluated to measure the pullout strength us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Studia Geotechnica et Mechanica
سال: 2018
ISSN: 2083-831X
DOI: 10.2478/sgem-2018-0005