PULL-OUT TESTS OF ROCK ANCHORS AND THEIR FAILURE MODES
نویسندگان
چکیده
منابع مشابه
Pull-out tests on bone anchors of a head-mounted parallel kinematic robot for skull surgery
Pull out tests for bone anchors used in surgical robotics were performed to prove the strength of the bone anchor -bone combination. Forces and displacement were measured to evaluate the suitability of the bone anchors as a connection between a surgical robot and bone. A universal experimental setup was designed to conduct the pull out tests. As specimens, human cranial cadaver bone, porcine ca...
متن کاملPull-out Behavior of Cfrp Single-strap Ground Anchors
Pull-out experiments were performed on four carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in rock and soil. The CFRP tendons used in these anchors comprise a single-strap end on both the ground and air sides. On the ground side, the single-strap end is embedded in a cylinder of high-strength grout which fits into the borehole. In rock applications, the grou...
متن کاملFracture Mechanics of the Microbond and Pull-out Tests
The properties of the fiber/matrix interface in composites have an influence on their overall performance. Common methods for studying the interface are micromechanical tests that load a single fiber/matrix interface to failure. Two popular tests are the microbond test [1] and the single-fiber, pull-out test [2]. In a microbond test a droplet of matrix is sheared off the fiber by pulling the fi...
متن کاملAn Investigation into the Pull-out Failure Mechanisms of Suction Caissons
This paper reports results from an investigation into the suction caissons failure mechanisms under vertical pull-out loads. An insight to the failure mechanisms of suction caissons paves the path for developing analytical solutions to their pull-out capacity. The numerical models of suction caissons have first been calibrated by and verified against several experimental data from other researc...
متن کاملReliability Analysis of K-Out-Of N: G Machining Systems with Mixed Spares and Multiple Modes of Failure (TECHNICAL NOTE)
This paper deals with the transient analysis of K-out-of-N: G system consisting of Noperatingmachines. To improve system reliability, Y cold standby and S warm standbys spares areprovided to replace the failed machines. The machines are assumed to fail in multiple modes. At leastK-out-of-N machines for smooth functioning of the system. Reliability and mean time to failure areestablished in term...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1994
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1994.504_157