Pull-out Strength of Caspar Cervical Screws
نویسندگان
چکیده
منابع مشابه
Pull-out strength of screws from polymethylmethacrylate cement.
We aimed to determine the optimal method of inserting a screw into polymethylmethacrylate (PMMA) cement to enhance fixation. We performed six groups of ten axial pull-out tests with two sizes of screw (3.5 and 4.5 mm AO cortical) and three methods of insertion. Screws were placed into 'fluid' PMMA, into 'solid' PMMA by drilling and tapping, or into 'curing' PMMA with quarter-revolution turns ev...
متن کاملCorrelation of pull-out strength of cement-augmented pedicle screws with CT-volumetric measurement of cement.
BACKGROUND Cement augmentation of pedicle screws increases fixation strength in an osteoporotic spine. This study was designed to determine the cement distribution and the correlation between the pull-out strength of the augmented screw and the cement volume within polyurethane (PU) foam. METHODS Twenty-eight cannulated pedicle screws (6×45 mm) (Peter Brehm, Erlangen, Germany) with four holes...
متن کاملPull-out strength of cemented solid versus fenestrated pedicle screws in osteoporotic vertebrae
OBJECTIVES Cement augmentation of pedicle screws could be used to improve screw stability, especially in osteoporotic vertebrae. However, little is known concerning the influence of different screw types and amount of cement applied. Therefore, the aim of this biomechanical in vitro study was to evaluate the effect of cement augmentation on the screw pull-out force in osteoporotic vertebrae, co...
متن کاملTriangulated pedicle screw construct technique and pull-out strength of conical and cylindrical screws.
To compare the mechanical effectiveness of a new conical screw design with a conventional cylindrical screw design, the screw insertion time, torque, and pull-out strength of single-pedicle screw and triangulated-pedicle screw constructs of each type of screw were compared in human cadaveric vertebral bodies. The time required to insert the conical screws was less than that required for cylindr...
متن کاملPull out Performance of Medical Screws used in Orthopaedic Surgeries
In this study, a new medical bone screw was designed and manufactured by Ti6Al4VELI GR23 material and tested in accordance with the ATSM F 543-02 test procedure experimentally. This test is used to measure the axial tensile force required to fail or remove a bone screw from a defined material. Concurrently, 3-D Finite Element Analysis (FEA) models of these medical bone screws were developed to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Neurosurgery
سال: 1993
ISSN: 0148-396X,1524-4040
DOI: 10.1097/00006123-199307000-00037